Automatic Revolving Door (2-WING)

This Automatic Revolving Door (2-WING) is made of high-strength alloyed aluminum. The sliding door leaf amid the door as well as show windows revolves together around the axis.

luxurious appearance

The side arc show cabin can provide at least 25kg advertisement and showing space. Thanks to the top-set spotlights, the luxury and grace are exaggerated to the full.

environment friendliness

In order to keep free from outside wind, dirt, noise, car exhaust, the connection parts are sealed with mane, including the interface between side arc show cabin and out arc wall, automatic door leaf between the ceiling and floor.

tremendous traffic passage

Thanks to the special design, SRAG-2, the 2-wing luxury automatic revolving door can send 10-20 people per revolution. In addition, the mid sliding automatic door can open in case of large flow of people and emergency, so it is very convenient to carry large-size cargoes.

firmness and durability

Made of special materials, the curve out wall and Gatepost are supported by strong revolving pivot and steel structure. Therefore, the firmness and smoothness of the door unit are guaranteed.

Powered by the powerful maintenance-free permanent magnet DC motor, the pushing force is steady and tremendous. Under normal working conditions, it can work well at least 15 years.

operation panel

There are a switch of 3 operation modes, slow speed button, emergency stop button.

safety control

The design of SRAG-2, the 2-wing luxury automatic revolving door is strictly guided by the people-oriented principle. Multiple safety protection devices can guaranteed passengers safety. It can be set at the mode of night, without need of additional security gate.

operation function

The revolving door unit can be stopped at 3 points. In summer, the show cabins are located on the axis and the sliding door is used.

In winter or stormy days, the show cabins are located on close point and revolve at a low speed.

motion sensor

BEA is fixed on the entrance and extrance of revolving door. two radar sensors are fixed into the entrance. When the radar sensors detect peoples passing, the door leaf revolves at a normal speed immediately.

technical parameters

Power supply: 220V-240V    50HZ     4A

Power input: 220V-240V

        50HZ   4A

Peak current: 15A      Power:600W

Speed:

High speed:1-4 r/min (adjustable)

Low speed:0.5-2 r/min (adjustable)

optional surface treatment

      Surface Fluorocarbon painting of colors

      surface decoration

Standard configuration

Glass of curve wall: 8mm curve toughened glass or 4mm+4mm Curved glue embedded glass

Door glass: 6mm toughened glass

High-strength alloyed aluminum frames/dirt-proof Coverer

High-strength alloyed aluminum(stainless steel) ceiling

ceiling light

mid sliding automatic door (with control panel)

All-Embedded activation units

Emergency backup power source

Operation of the mid sliding automatic door

Show cabin stop at the axis, automatic door operation

Both sides of the door leaf are equipped with right-shot infrared sensor eyes

Revolving speed buttons for diabled and slow movement

They are installed on the sides of Gatepost. Once pressed, the door will revolve at low speed for 25 sec.

In the following cases, the door will stop immediately.

When the door leaf is pushed forward or backward by huge force.

When the black rubber pressure sensor at the gatepost is pressed.

If needed, the slow revolving door leaf can be stopped by drawing.

In case of emergency, the door leaf can be pulled or pushed by hand (door leaf stops immediately).

emergency stop button

Installed on the extrance gatepost

when pressed: the door leaf stop immediately

When turn right: the door leaf resume the revolving state

fire protection system

Communicated with fire alarming system, when receiving signal, the door leaf stops at the axis, the sliding automatic door keeps full-open.

Writing and maintenance of Diagnostic program

The revolving door and mid sliding door can be controlled by programmes.

Digital monitor shows operation mood, failure information, maintenance interval, all the functional parameters.

remote failure diagnosis (optional)

Connected with the networks of control center by main control panel

Remote display of the revolving door speed anytime.